The control of paracetamol particle size and surface morphology through crystallisation in a spray dryer

The parameters governing the crystallisation of paracetamol using various conventional techniques has been extensively studied, however the factors influencing the drug crystallisation using spray drying is not as well understood. The aim of this work was to investigate the crystallisation of an active pharmaceutical ingredient through evaporative crystallisation using a spray dryer to study the physicochemical properties of the drug and to use semi-empirical equations to gain insight into the morphology and particle size of the dried powder. Paracetamol solutions were spray dried at various inlet temperatures ranging from 60 °C to 120 °C and also from a series of inlet feed solvent compositions ranging from 50/50% v/v ethanol/water to 100% ethanol and solid-state characterisation was done. The size and morphology of the dried materials were altered with a change in spray drying parameters, with an increase in inlet temperature leading to an increase in particle Sauter mean diameter (from 3.0 to 4.4 µm) and a decrease in the particle size with an increase in ethanol concentration in the feed (from 4.6 to 4.4 µm) as a result of changes in particle density and atomised droplet size. The morphology of the dried particles consisted of agglomerates of individual crystallites bound together into larger semi-spherical agglomerates with a higher tendency for particles having crystalline ridges to form at higher ethanol concentrations of the feed.     

中国大气田科学开发的内涵

大气田是指天然气探明地质储量超过300×10~8 m~3、天然气峰值年产量在10×10~8 m~3以上且具有一定稳产期的气田。其是中国天然气储产量快速增长和未来长期稳定发展的重要基础,也是保障我国供气安全的关键。通过对国内外260余个大气田开发实践的系统分析和典型气田的解剖模拟,综合研究了大气田科学开发的内涵、核心技术以及全生命周期指标体系。大气田科学开发的内涵包括:①提出以"识别水、控制水、治理水"为技术体系的天然气开发理念,即常规气田"控水开发"、非常规气田人工压裂"注水开发",根据气藏类型和气藏特征,确定合理的采气速度;②综合评价气田开发经济效益和社会效益,保障气田长期稳产;③根据气井生产特征和储层发育特征,选取适用的气田稳产方式;④依据对常规与非常规气藏不同开发阶段的精细描述、气藏开发特征和生产动态的监测,确定气田可采储量、气田水与人工注水开发规律、气田提高采收率技术对策、气田效益稳产期与发展战略。大气田科学开发的核心技术包括:规模优化技术、科学布井技术、均衡开采技术和深度挖潜技术。进而综合优选出产量、压降、采出程度、单位压降产量等多个参数作为评价大气田科学开发的关键指标,建立了高压、低渗透—致密、裂缝—孔隙型和页岩气等4类气藏的全生命周期指标体系。结论认为,该研究成果有助于指导不同类型大气田的科学开发,进一步促进我国天然气产业的快速发展。     

Lewis acid-oxygen vacancy interfacial synergistic catalysis over SO42−/Ce0.84Zr0.16O2–WO3–ZrO2 for N,N-diethylation of aniline with ethanol

Herein, a new mechanism involving Lewis acid-oxygen vacancy interfacial synergistic catalysis for aniline N,N-diethylation with ethanol was proposed, and the SO₄²⁻/Ce_0.84Zr_0.16O₂–WO₃–ZrO₂ catalyst (SCWZ) with both Lewis acid sites and oxygen vacancies was synthesized by the hydrothermal method, which shows better catalytic activity than the reported solid acidic catalysts. Besides, the SO₄²⁻/ZrO₂ (SZ) and SO₄²⁻/WO₃–ZrO₂ (SWZ) catalysts were also prepared and compared with SCWZ to investigate the synergistic effect of each component. The SO₄²⁻ and WO₃ mainly generate Lewis acid by bonding with ZrO₂, which is beneficial for the fracture of the N–H bond in aniline. The Ce_0.84Zr_0.16O₂ solid solution mainly plays a vital role in generating the oxygen vacancies as the interface active species, which can participate in stripping –OH from ethanol, then the carbocation will also be released, which only needs 1.3805 kcal/mol energy, calculated by density functional theory (DFT), to be input. In comparison, the traditional reaction mechanism needs the Brønsted acidic sites to promote the protonation of ethanol, then dehydration and subsequent formation of carbocation followed, and 108.6846 kcal/mol energy needs to be input, which is far higher than that of the new mechanism. The apparent activation energy (E_a) over SCWZ was measured by experiment to be 34.09 kJ/mol, which is much lower than that of SWZ (47.10 kJ/mol) and SZ (54.37 kJ/mol), illustrating comparatively preferable kinetics for SCWZ than that of SWZ and SZ. Besides, the conversion of aniline and selectivity to N,N-diethylaniline over SCWZ reach almost 100% and 73%, respectively. The SCWZ can be renewed for 4 times without rapid deactivation, and the longevity of SCWZ is longer than that of SWZ and SZ, as the loaded SO₄²⁻ and tetragonal ZrO₂ are stabilized by Ce_0.84Zr_0.16O₂ and WO₃, respectively.     

Morondava盆地西部侏罗纪断陷盆地构造特征

系统分析了Morondava盆地西部侏罗纪断陷盆地构造特征,实可分为东部断陷带、中部断裂构造带和西部侏罗系残留斜坡带,可能存在有断鼻型、背斜型、地层剥蚀尖灭型、断块型、古潜山及岩性圈闭。     

福建某低品位金矿新型浸金剂浸金试验

福建某斑岩型金矿品位低、规模大,金主要以自然金形式存在,可见金的粒度较粗,为高效利用该低品位金矿,开展新型浸金剂金蝉全泥浸出试验和柱浸试验,结果表明：全泥浸出在磨矿细度为-0.074 mm占80%、矿浆浓度25%、加石灰调pH 值11.0左右、初始金蝉浓度为500 mg/L和过程中控制金蝉浓度不小于300 mg/L条件下浸出20 h,金的浸出率为93.43%,金蝉耗量为1.02 kg/t；柱浸在矿石粒度为-30 mm条件下喷淋浸出23天,金累计浸出率和金蝉累计耗量分别为86.54%和1.22 kg/t。     

紫金山东南矿段成矿期次、阶段浅析

通过对紫金山东南矿段铜钼(金)矿床地质矿化特征分析,指出铜钼矿化带主要赋存于花岗闪长斑岩的内外接触带,处于似斑状花岗闪长斑岩的上部,金矿化带赋存在表生氧化带的英安玢岩、隐爆角砾岩中。经过对矿石的组构特征、矿物生成顺序等特征分析,将矿床的成矿演化过程分为斑岩热液期、高硫化浅成低温热液期、表生氧化期三个主要矿化期次,进一步将斑岩热液期分为黑云母-钾长石化阶段、石英-绢云母化阶段、碳酸盐化阶段三个阶段;高硫化浅成低温热液期分为地开石化阶段、明矾石化阶段、硅化阶段三个阶段。研究结果为进一步研究矿床成因提供了依据。     

甘肃省陇东地区极端降水的时空特征

为阐明甘肃省陇东地区极端降水的变化规律,利用该地区13个气象台站1961~2015年的逐日降水资料,应用超门限峰值法、反距离加权法、线性倾向估计法、滑动平均法、Mann-Kendall突变分析法、复值Morlet小波分析法研究极端降水的时空变化特征。结果表明,陇东地区各站第95百分位极端降水阈值在27.8mm附近变化,即可以大雨事件作为极端降水事件进行监测;极端降水指数主要表现为从南向北递减的趋势,极端降水事件对环县和崆峒的影响较小;极端降水事件虽然在总量、强度上表现为减小趋势,但其发生频次及对总降水的贡献率逐渐增强;极端降水总量和极端降水强度周期变化均在21年左右能量最强,而极端降水频次和极端降水贡献率周期变化分别在28、5年左右能量最强。     

水平衡法与高温转化法在矿泉水氢氧稳定同位素测定中的应用

为了鉴别不同品牌矿泉水标注水源地信息真伪,对11种不同品牌饮用水的氢氧稳定同位素(δD和δ18 O)进行测定。结果表明,水平衡法(GasBench-IRMS)和高温转化法(TC/EA-IRMS)的测定结果一致性较好,两种方法测定6种不同饮用水的δD和δ18 O的平均差异分别为(0.6±1.59)‰和(0.02±0.13)‰。水平衡法需要较长的制备和测定时间,但δD和δ18 O的测定精度明显优于高温转化法。11种饮用水δD和δ18 O变化范围较大,其δD和δ18 O受不同品牌饮用水的水源地降水影响形成明显的地域性。虽然无法区分矿泉水是否由其他类别饮用水伪造,但δD和δ18 O可以为特定区域(如高海拔与沿海地区)以及产地相近的矿泉水水源地鉴别提供依据。     

Analysis and optimisation of particle mixing performance in fluid phase resonance mixers based on Euler/Lagrange calculations

A novel mixing principle utilising oscillating liquid columns was analysed numerically with regard to particle dispersion characteristics. For producing fluid oscillations a pipe (diameter 100 mm) was immersed centrally into a vessel (diameter 450 mm) filled with liquid (filling height 700 mm) and periodically pressurised (frequency 1.2 Hz). The outlet geometry of the central pipe, just ending near the vessel bottom, has a strong effect on mixing and was optimised in this study. The principle of a FPR-mixer does not require rotating stirrers and in the turbulent regime it has power numbers comparable to propellers. The numerical calculations were conducted by a Euler/Lagrange approach neglecting two-way coupling as well as inter-particle collisions for clarity in order to only focus on the effect of interfacial forces on particle dispersion. The continuous phase was calculated in an unsteady way based on the Reynolds-averaged equations combined with the k-ω-SST (shear stress transport) turbulence model. Lagrangian tracking was conducted considering all relevant forces; drag, gravity/buoyancy, fluid inertia, added mass, Basset force and transverse lift forces due to shear and particle rotation. The importance of these forces was analysed with respect to the turbulent particle Stokes number (considered range 0.004 < St < 10.0) and particle/liquid density ratio (i.e. 1.05, 1.5 and 2.5). Finally, the significance of Basset force and shear-rotation lift force (i.e. Magnus effect) on the dispersion process was quantified by mixing parameters.     

New doctors ranking system based on VIKOR method

Nowadays, we can use different websites that help us make decisions about various aspects of our lives. However, privacy protection prevents websites from providing personalised guidelines to users. We propose a novel doctor‐ranking system (DRS) based on multi‐criteria group decision‐making (MCGDM) method to address the problems of privacy protection. The following aspects differentiate our proposed DRS model from previous works: (a) textual information reviews are used to identify user preferences and complementary criteria, (b) criteria weights are determined by term frequency inverse document frequency (TF‐IDF) instead of Delphi method or expert opinion, (c) intuitionistic fuzzy sets (IFSs) are used to replace sentiment analysis to express subjective user criteria, and (d) VIsekriterijumsko KOmpromisno Rangiranjie (VIKOR) method for MCGDM with IFSs is used to solve the doctor‐ranking problem. We apply our proposed model to datasets from Haodf.com to compare the performance of our method with that of sentiment analysis and technique for order performance by similarity to ideal solution (TOPSIS) methods. The experimental results show that our method provides accurate ranking and increases the reliability of DRS.